SM-100 SUSPENDED MOUNT MANUAL
10
1. Insert one end link of a long chain (G) into an outer jaw slide (B) placed at the end of the stretcher bar.
2.
Secure with a 1/4”-20 X 1/2” shoulder screw (C) and 1/4”-20 locknut (E).
3. Repeat steps 1 and 2 to secure the remaining long chain (G) at the opposite end of the stretcher bar (A).
4. Tighten stretcher bar fasteners, taking care not to over-tighten.
5. Use zip ties (I) to secure the power cord to the stretcher bar (A) in two places and to guide the cord
around the corner where the bar meets the long chain, making sure not to put tension on the power
cable.
6. Continue to apply the zip ties (I) every 4 feet along the long chain (G) and power cable length.
7. Attach the long chain (G) with the power cord to the connecting link (N) closest to the cord grip (O).
8. Attach the long chain (G) without the cord to the connecting link (N) farthest from cord grip (O).
9. Coil any excess chain and tie with wire.
SUSPENSION CHAINS AND POWER CABLE
G
C
E
B
G
I
A
Steel tank roof
G
N
O
N
G
1
6
2
5
7
8
Back to Contents