PM-100 PIPE MOUNT MANUAL
10
MOUNT ASSEMBLY (CONT.)
Lower Mount Assembly
1.
Slide the lower mount can strap (G) into position on the unit 3” from the cage, ensuring the clamp on the
mixer cage is in line with the can strap flanges.
2. Secure the can strap with a
3/8”-16 x 1” hex head screw (K), lock washers (L), and nylon locknut (M). Be
sure that there is a lock washer on either side of the flanges.
3.
Position the strut plates (I) and collar blocks (H) together as show below, forming the largest hole for the
pipe to pass through.
4.
Fasten using two 3/8”-16 x 5” hex screws (J) and nylon locknuts (M).
3 inches
Maintain alignment
Cage clamp
G
K
L
M
L
1
2
M
I
J
H
3
4
Back to Contents