3
cal cord. Always use extreme caution around
electrical equipment and water situations.
ASSEMBLY & INSTALLATION
Please see the proper Assembly and Instal-
lation Instructions enclosed in this manual.
Each is speciic for your model and size of
Fountain. Note: Use the nylon tie provided
to help keep the power cords for the unit and
lights free of the propeller by tying the cords
and one of the mooring ropes together. Note:
It is extremely important to test the GFI
breaker in the control panel upon each installa-
tion/reinstallation of the unit to ensure proper
functioning.
WARRANTY
Kasco Fountains are the result of over 35 years
of design and engineering. Kasco products
are built to withstand the toughest conditions.
Kasco Marine backs each 1400JF Fountain
with a 2 Year Warranty. This warranty cov-
ers any and all manufacturers defects within 2
years from the date of purchase (See Warranty
section). Please register your Fountain online
at:
www.kascomarine.com (under the Technical
Tab)
USE AND OPERATION
Kasco Fountains are designed and engineered
for continuous duty, such as on ish farms or
other aquaculture applications, or on-demand
use, as needed in a recreational water feature.
During lotation operation, the water is pulled
from 360
O
around the unit and from below the
unit. The water is pulled upward and thrust
through the lotation collar into the air.
Your Kasco Marine Fountain is ready for im-
mediate use (after installation). The motor
and ball bearings are submerged in oil and no
further lubrication is needed. Make sure to
keep the motor housing clean from hard water
deposits and/or algae. (See Maintenance Rec-
ommendations)
It is extremely important that proper and suf-
icient voltage (120V) is supplied to the Foun
-
tain motor. Each Fountain is supplied with a
UL and CSA approved C-25 GFI Protected
Control Box. The Fountain is to be plugged
into the C-25 outlet labeled “UNIT” and the
C-25 plugged into a properly grounded recep-
tacle (See C-25 Instructions).
Kasco Fountains are lightweight, energy ef-
icient, and easy to install and operate. We
strive to produce products that exceed cus-
tomer expectations. We hope you enjoy your
Kasco Fountain.
UNIT STORAGE
When storing units during the offseason, it is
important to store them upside down if they
are going to be sitting for long periods of
time. Units that sit upright on a shelf for many
months, or even years have a greater likeli-
hood of seals drying out. Storing upside down
will ensure oil is lubricating the seals and
prevent drying.
Parts & Tools
• 1400JF Aerating Fountain (Assembled in
box) (1)
NOTE: If lights are not purchased or includ-
ed, the cord and Transformer on the left side of
the picture will not be included with the ship-
ment.
