6
5
Delete ALL User Card
1.
Delete
ALL RFID Tags from the lock for remove door access.
2.
The RFID Tag must exist in the lock for successful deletion.
Format: “* * <Management Code> # 444 # “
Example: “* * 888888 # 444 # ”
Successful setting: 1 long beep, Will exit programming mode automatically
Unsuccessful setting: 2 short beeps
6
Set Opening Mode
1.
There are two Opening modes. 1) Standard Mode – one step entry 2) Dual Entry Mode – two step entry.
2.
Standard Mode: either pin code or RFID will grant access
3.
Dual Entry Mode: Both RFID and Pin code are required for access.
4.
Note: to be able to enable Dual Entry Mode you need at least 1 RFID tag and 1 user pin code already
programmed.
Set Opening Mode: Standard Mode [DEFAULT MODE]
Format: “* * <Management Code> # 141 # “
Example: “* * 888888 # 141 # ”
Exit programming mode by pressing “ * * “
Set Opening Mode: Dual Entry Mode
Format: “* * <Management Code> # 142 # “
Example: “* * 888888 # 142 #”
Exit programming mode by pressing “ * * “
7
Enable Free Passage
To ENABLE Free Passage:
•
During the unlocking action, the green LED will be displayed. Press and hold # button for 3 seconds,
when the green LED is display. After 3 seconds, a rising tone will sound to signify that free passage is
enabled.
To DISABLE Free Passage:
•
Any at time, press * button for 3 seconds, the lock will revert to locked state.
8
How to Factory Reset
1.
This will erase all lock data and default
Management Code to “888888”.
