4
.
August 2019
.
IMO_66_EN_v2 / 104674
Roto Safe E601 – Eneo AF
Subject to change.
General operation instructions
Various impurities in the top
area of the door leaf (i. e. plaster
residue) may not be wiped in the
direction of the lock (faceplate)
– the locking points could block.
Screw in screws straight so that
no tension can occur. Do not use
any stainless-steel screws!
Do not carry the door or door leaf
by the lever-handle.
During transport and handling,
the door leaf must be braced to
the frame with suitable packers
(sash-support components,
wedges etc.).
If the original cylinder is not in-
stalled, unlock the door only with
a Roto universal access key.
Install the cylinder stress-free re-
spectively aligned at a 90 degree
angle to the door leaf.
Mount long-plate handles and
rosettes stress-free.
The door leaf may not be drilled
through in the lock area if the
lock is installed (e. g. for protec-
tive hardware).
4–5 mm
Functional
clearance
Main lock latch conversion
Automatic bolt conversion
Move the slider upwards.
Latch is released.
Turn the latch 180°.
A
Move the slider upwards.
B
1. Insert the installation tool as
far as it will go.
2. Pull out the latch.
C
Turn the latch 180°.
D
1. Insert the spring element in the
faceplate opening.
2. Slide in the latch over the
deadbolt.
E
1. Hold down the trigger
mechanism.
2. Push in the latch completely.
F
1. Push in the latch completely.
2. Push in the deadbolt
afterwards.
