Kartsana JUPITER TG-880 C, Инструкция по эксплуатации

Страница: 10 / 32

OPERATION AND HANDLING OF
CART TG-880-C COMPACT STRETCHER
7
Place the clasps (C) in the position shown in the figure above. Pass the male
part of the buckle (D) between the openings (C) until it is inserted into the female
part B. Once the assembly is anchored in place, centre and tauten the assembly,
adjusting the tension of the belt at ends A and/or E. (In the feet belt the C
fasteners do not show).
2.2.7.- Method for fastening the safety belt on the patient’s stomach
It is advisable for this belt to be attached to the stretcher to ensure the
complete safety of the patients and guarantee compliance with the
UNE-EN 1865 standard test that is performed.
Put the female part of the buckle A and male part B in the position shown in the
figure below and insert the latter into the slot in the former. Once the assembly is
firmly secured, centre and tauten it, adjusting the tension of the belt at end C.
It is advisable to ensure that while the patient is on the stretcher, he/she
is secured at all times by the safety belts.
2.2.8.- Dismantling-assembly of the stretcher belts.
There are two different types of achoring for the stretcher belts:
- Anchoring with a ring.