Karomat 66611, Инструкция по эксплуатации

Страница: 20 / 36

18
▪
This appliance has been designed for only using cleaning water, do not use
corrosive chemicals. Ask your dealer which cleaning agent to use.
▪
Do not use the appliance unless you are wearing protective clothing, safety
goggles and ear protectors. Do not use the appliance in the area of people
who do not wear this protection.
▪
High-pressure jets can be dangerous if subject to misuse. The jet must not be
directed at persons, live electrical equipment or the appliance itself. Pressure
washers should not be pointed at tire walls, as it may be possible to damage
them.
▪
Do not direct the jet against yourself or others in order to clean clothes or
footwear.
▪
Disconnect from the electrical power supply before carrying out user
maintenance or when moving the machine to another job.
▪
To ensure the appliance safety, please use only original spare parts from the
manufacturer or approved by the manufacturer. Do not use the machine
before you changed them if they are damaged.
▪
Incorrect fuels shall not be used, as they may prove hazardous.
▪
Do not spray flammable liquids in the area of the high-pressure cleaner
because of the risk of explosion.
▪
Beware of the danger of the kickback force on the spray assembly when
opening the trigger gun and grasp the gun with hands firmly.
4. OPERATING INSTRUCTIONS
This unit can be fed with with warm water up to 50ºC maximum.
The motor of this pressure washer will NOT run continuously. The unit will
only operate when the trigger is squeezed.
▪
Connect the high pressure hose to the washer and connect the spray gun to
the high pressure hose.
▪
Connect the lance to the gun.
▪
Check if water filter is clear of any blockage.
▪
Connect the water supply hose.
▪
Check that the hose has no kinks in it.
▪
Turn on water and check for leaks.
▪
Depress trigger to allow air to be expelled though the pump and hoses, lock
trigger.
▪
Plug in machine and turn on switch.
▪
Unlock trigger and use the pressure washer.
Shut down
1. Turn off the motor(push switch to the off position)
2. Unplug the unit from the power source.
3. Turn off the water supply.