Karmann Ontario 580, Инструкция по эксплуатации, Страница: 42 / 78

The fridge is designed for operation with 230 V,
12 V or gas. Selection of the mode of operation
and cooling capacity takes place on the
control panel.
A = Energy selector switch
B = Gas/electrical thermostat
C = Door lock
Gas mode
• Open main shut-off valve (p. 5-1) and the
shut-off valve in the body (page 5-2).
• Set the energy selector switch A to gas mode.
• Turn the knob B in clockwise direction as f
far as it will go.
• Ignition is automatic. When the "Gas"
indicator lights up and there is a ticking noise,
this shows that ignition sparks are being
generated. After successful ignition the noise
will stop.
• To switch off gas mode (complete shut-down)
set the energy selector switch A to the
vertical position 0.
230 V mode
• Set the energy selector switch to mains
operation (230V).
• Make sure you only select this operating
mode when the mains input matches that
given for the fridge; otherwise the unit may
be damaged.
12 V mode
• Set the energy selector switch A to 12 V
mode.
• 12 V mode is only possible when the motor-
home is travelling; this prevents excessively
fast discharge of the battery.
Automatic mode – AES (optional)
In the AES version the fridge has an automatic
selection facility. The unit is equipped in addition
with an automatic function which chooses
autonomously between different kinds of
energy. To achieve this set the switch A to
"Auto". The electronically selected type of
energy is indicated. You can switch to manual
mode at any time.
Temperature control
The fridge needs a few hours to achieve its
normal operating temperature. When the fridge
is full the cooling time is longer.
• In 230 V mode knob B is used for control
purposes.
Once operating temperature has been
reached, the controller can be turned back
to a middle position.
• In gas mode knob B is also turned back to a
B A
C
Fridge
GAS INSTALLATION
6-8