29
Disassembling the Scooter
NOTE:
To reassemble the scooter, reverse the following procedure.
Remove front basket, if applicable.
Fold backrest down.
Remove driver's seat. (See Figures 7.1 and 7.2)
Remove the rear casing. (See Figure 7.4)
Remove the batteries by disconnecting them from the central relay box. (See
Figures 6.4, 6.5 and 6.6)
Replace rear casing.
Tilt down the steering column all the way.
Removing/Installing the Seat
Figure 7.1
Figure 7.2
Removing the Seat
Lift the swivel lever all the way up.
Pull up on the swivel lever and seat until it detaches from the frame post.
Installing the Seat
Holding the swivel lever up, insert the seat post into the frame post. Rotate slightly until it clicks
into place.
Installing a Seat Belt
After market safety belts are a great idea for all users of powered scooters.
Scooters are motorized vehicles. Some local or regional laws may require
drivers to wear safety belts. Contact your local government center for more
information to insure you use your scooter within the laws of your region.
Figure 7.3 shows the location where a seat belt can be attached by your Karma
service provider. They have all the tools, service manuals and technical
know-how to assure your safety through a proper installation. Karma does NOT
recommend installation of a safety belt by anyone other than an authorized
Karma service provider.
