11
Speed Dial
Allows you to set various forward and reverse speeds. The settings are not traditional gears, but
are a percentage of maximum power. This is gross power, while the variable speed levers help
you to fine tune your speed and act similar to an accelerator.
Forward, Reverse and Braking
◎
Pull the right variable speed lever backward with your right hand to make the scooter
move forward.
◎
Pull the left variable speed lever backward with your left hand for the scooter to move
backward.
◎
A small speaker will "beep" when the vehicle is in reverse.
◎
If you release the variable speed lever while in forward or reverse, the electromagnetic
brake will be activated to stop the vehicle.
Turn Signal Buttons
◎
The signal light will flash and a small speaker will make a "beep-beep" sound if you
press either the right or left button.
◎
Press the button again to turn off the turn signal.
Horn Button
The horn will sound for the duration of time the button is pressed.
Headlight/Taillight Button
The headlight and taillight will be turned on when this button is pressed. Push the button again
and the lights will turn off.
Electromagnetic Brake
Release the variable speed lever completely and the electromagnetic brake will automatically
activate.
WARNING
：
NEVER use the freewheel mode when going down an incline.
The electromagnetic brake won't function in freewheel mode.
Driver's Seat
◎
Lift up the swivel lever completely to rotate the
seat up to 90 degrees to either side.
◎
Lift up the slide lever completely to move the
seat forward or backward.
◎
Lift up the recline lever completely to recline or
raise the seat to the full upright position. The
recline lever also allows you to fold the seat
down.
Figure 5.4
