Karma eFlexx Series, Руководство пользователя

Страница: 52 / 84

40
6.2.2.13 Remove the AC power cable of the charger from the AC
power socket.
6.2.2.14 Remove the DC power cable of the charger from the
charger socket of the battery.
6.2.3 Stop charging and recharge the battery
If it is necessary to stop charging the battery before it is fully charged
and then to recharge the battery later or somewhere else. Be sure to
follow the procedures listed below precisely.
6.2.3.1 The power of the charger is OFF when O ( labeled on the
button) is pressed down. (Figure6-2).
6.2.3.2 Remove the AC power cable of the charger from the AC power
socket.
6.2.3.3 Wait until the status indicator of the charger is off.
6.2.3.4 Remove the DC power cable of the charger from the charger
socket of the controller panel or the battery.
6.2.3.5 When it is ready to recharge the battery, connect the DC power
cable of the charger to the charger socket of the controller
panel or the battery.
6.2.3.6 Connect the AC power cable of the charger to the AC power
socket.
6.2.3.7 Ensure all cables are properly connected. Turn on the
charger as I ( labeled on the button) is pressed down.
(Figure6-5).
6.2.3.8 Refer to 6.2.1.7 or 6.2.2.7 to remove the charger when the
battery is fully charged.