Karma eFlexx Series, Руководство пользователя

Страница: 40 / 84

28
5.20.2.1 Pull the two freewheel hubs out
5.20.2.2 Rotate the freewheel hubs for about 45 degrees.
5.20.2.3 Let go the freewheel hub, and make sure that it inserts
into the slot. You can tell that it inserts into the slot when
you hear a click sound. (Figure 5.42)
Figure 5.39 Figure 5.40 Figure 5.41
WARNING
● The electromagnetic brake won't function in freewheel mode. Be
sure to have an attendant with you when the wheelchair is in
freewheel mode.
● Do not set the wheelchair in freewheel mode when on an incline or
decline. Only use freewheel mode on flat surfaces since your
electromagnetic brakes are not engaged in this mode. Without
these brakes, it will roll down a hill causing injury or damage.
5.21 Freewheel Levers
The freewheel levers to allow manual pushing of the powered
wheelchair if required.
5.21.1 Freewheel Mode: This is to allow manual pushing of the powered
wheelchair. To set the chair into freewheel mode, push down the
levers positioned at the both sides of the chair. When the levers
are pushed down completely, then release the levers, and the
powered wheelchair is now in freewheel mode. (Figure 6.41)
5.21.2 Drive mode: Make sure to pull both the levers up, and then the
wheelchair can be driven by motor power. (Figure 5.42)。