Karizma Plus Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 12

Karizma Plus Скачать руководство пользователя страница 12

MENU 9 - Walktest

The walktest allows you to check the operation of all of the security points in your system in order to prove
that they still work correctly. Your engineer will advise how often you should carry out a walktest.
In menu 9 press the ENTER key to start the walktest.

A******...*.....
................

The keypad display will show a ‘*’ for each point which has been enabled but has not yet been tested. Points
which have not been enabled are displayed as dots.
The top left of the display represents point 1, the top right is point 15, the bottom left is point 16, the bottom
right is point

30. The ‘A’ in the top left indicates that the points in program A are being tested.

A1111*...*......
................

Each time that an enabled point is activated the inside sounder will produce a warble sound, and the display
will change to show a ‘1’ in the appropriate position.
The inside sounder will stop when all points are clear.

A1111...........
................

Initially the walktest will allow you to test Security points that are used in program A. To test security points
used in programs B or C press either 2 or 3 when the walktest is running to select program B or C
respectively. The keypad will display the selected program at the top left. Press 1 to reselect program A.
Press ERROR at any time to stop the walktest.
Momentarily press the ERROR key to exit the menus.

MENU 10 - Test OUTPUTS

Menu 10 allows you to test any of the outputs from the system. It presents you with a list of the outputs
which may be tested. To turn on any output press the ENTER key, to turn it off press any key. The following
outputs may be tested: BELL, STROBE, SOUNDER (LOW VOL), and SOUNDER (HIGH VOL).

10)Test Output
BELL
BELL
ON

«
...
10
11
12

Содержание Plus













Отзывы:

Нет отзывов