MENU 7 - Omit 24 hour points
A 24H point is armed all of the time, whether the system is set or not. Violating that point will always cause
an alarm. The manager can omit a 24H point if it has been programmed as omittable by the engineer. A
point which has been omitted cannot cause an alarm. Check your SIS to see if any 24H points are omittable.
Menu 7 allows you to omit 24H points. Go to menu 7 and press the ENTER key.
7)Omit
24 Hr Points?
The keypad displays the first point in a list of 24H points that can be omitted. Use the
and
keys to
select the point to be omitted, then press the ENTER key.
06:FIRE DOOR
Omit 24hr:No
The
symbol moves onto the second line of the display. Now use the
and
keys to change NO to
YES and press the ENTER key.
Re-Instating 24 hour Points
To re-instate a 24H point which was previously omitted follow the procedure described above, but change
YES to NO.
Point Fault
If the point cannot be re-instated because it is still open the keypad will display an error message. You must
close the point and repeat the procedure.
Any 24 hour points which have been omitted by the manager will automatically be re-instated when the
system is set. It is not possible to omit 24H points when setting the system.
MENU 8 - Set Time and Date
Select menu 8. The keypad displays the current time in 24 hour format, so 1am is 13:00. Key in the correct
time and press the ENTER key.
Time and Date
Time? 00:05
The keypad will now display the current date, in a day-month-year format. Key in the correct date and press
the ENTER key.
Time and Date
Date? 21-02-03
The keypad will now display the current day of the week. Use the
and
keys to change the day and
press the ENTER key.
Time and Date
Friday
The keypad will give a double beep to indicate that the date has been accepted.
