Instructions
–
8006A-Rev 1
For Technical Support Call: 800-343-7486 Monday-Friday 7AM - 4 PM (PST)
Page 11
Step 1C
–
NV200/City Express
•
Choose the four desired mounting
locations from the roof of the van.
•
Remove the plugs from the roof in
ONLY the four desired mounting
locations to expose the holes.
•
Place sealant around the exposed
holes in the roof under the rubber
pieces to prevent water from leaking
into the cargo area.
•
Bolt through the foot into the exposed
holes in the roof using a M8 x 30mm
hex head, M8 lock washer, M8 flat
washer and a rubber pad in the order
shown. Use the rubber pad with the
three holes and place directly on the
roof.
•
Be sure to place sealant around the
exposed holes in the roof under the
rubber pads.
•
Repeat on both ends of the cross bar
on both cross bars.
•
Snug tighten, but allow movement.