Electronic Dartboard Karella Premium Silver 3
Art.Nr. 8075.01
tweezers by grasping the exposed end and pulling it out of the segment. If this is not possible, you can attempt
to push the tip through to the back of the segment. Use a nail that is smaller than the hole and gently push the
tip until it falls through the other side. Be careful not to push too far and damage the circuitry behind the
segment. Don’t be alarmed if tips break. This is a normal occurrence when playing soft tip darts. We included a
pack of replacement tips which should keep you supplied for quite some time. When replacing tips, make sure
you use the same type of tips that come with this dartboard.
TECHNICAL SECURITY TIPS
Connect the device only in an according to regulation installed outlet, which voltage agrres with the technical
data of the net adapter. Use exclusively the net adapter, which is included in the scope of supply.
On no account start running the device, if the device itself shows visible damages or the connecting pipe. This
would be a considerable security risk.
Please, pull after ending of the play or by any disturbance always the net plug (adapter) from the outlet.
We recommend the connecting lead to let be in the device socket, because constant, improper pulling out could
cause on a continuing basis a loose contact.
Let make any repair in the device or in the adapter only from a professional workshop. With independent,
improper repair after opening the dartboard considerable dangers for the user can originate. Besides, in this case
there will be lost any guarantee claims.
ASSEMBLY – INSTRUCTIONS
Hang up the dartboard with the provided fixing bolts incl. rawl plug according to the following measurements.
Respect to the fact, that the screws are directly on a horizontal line, so that the dartboard just hangs correct
later.
With the throwing the distance of the front surface of the dartboard is to the dropping line 2.44 m.
Dimensions of the dartboard:
Height 68,4 cm
Width 52,0 cm
Depth 7,0 cm
