
DS200 User’s Guide
DS200 User’s Guide
DS200 User’s Guide
DS200 User’s Guide
V003. 09.09.2002
C-13
77
Dial 77.
G
Replace the handset.
Notes:
Notes:
Notes:
Notes:
1. The redial count for the Auto-dialer is determined through programming (It is 15 by
factory default). The system waits for 15 seconds between two consecutive dials.
2. If the system fails to connect the line after it has dialed the number for determined times
(in the range 1..16), then the call is cancelled.
3. The dial tone shifts to a dual-tone signal for the extension who has activated the Auto-
dialer.
4. The calls coming through the Auto-dialer ring in a distinct cadence at the extension’s
phone.
5. You are warned through ear by short beeps, if your phone is busy during the connection.
In that case, you should either terminate your conversation as soon as possible, or park
your current call and hang up. Then you can answer the recall connected by the Auto-
dialer when your phone rings.
Common Pool Auto
Common Pool Auto
Common Pool Auto
Common Pool Auto----dial(78):
dial(78):
dial(78):
dial(78):
In case a number you call is busy, the Automatic Redialing service make your exchange call
the number automatically and continuously in certain intervals and then connect the line
when the number becomes available and start to ring.
In order to activate the Auto
In order to activate the Auto
In order to activate the Auto
In order to activate the Auto----dialer for a number recorded in the Common Pool:
dialer for a number recorded in the Common Pool:
dialer for a number recorded in the Common Pool:
dialer for a number recorded in the Common Pool:
H
Lift the handset and hear the internal dial tone.
78
Dial 78.
B
Dial the common pool memory number you want to call (000-999).
G
Replace the handset.
C
Wait for the Auto-dialer to detect the availability of the number and
connect the line.
D
Your phone will ring when the connection is established.