Kärcher WD 2, Руководство по эксплуатации

Страница: 8 / 14

– 8
Illustration
 Turn off the appliance and disconnect the mains
plug.
Illustration
 Remove the appliance head and empty the reser-
voir.
Illustration
 Stow away the mains cable and accessory at the
machine. Store the appliance in a dry room.
 Clean the appliance and accessory parts made of
plastic with a commercial plastic cleaner.
 If required, rinse the container and accessories
with water properly and dry them before reuse.
Illustration
 When necessary, clean the foam or cartridge filter
under running water only, do not wipe or brush
down. Allow to dry completely prior to installation.
For variants with foam filter, a cartridge filter (special ac-
cessories) can be purchased later and used instead of
the foam filter.
 Prior to installing the cartridge filter, remove the
black cover cap and keep it for later use with the
foam filter.
 Insert the cartridge filter and lock it with a bajonet
lock.
If the cleaning power of the appliance deteriorates
please check the following:
 Accessories, suction hose or suction pipes are
clogged, please remove the obstruction using a
stick.
 Filter bag is full, install new filter bag.
 Foam filter is contaminated, clean it under running
water.
 Cartridge filter is dirty, knock off dirt from cartridge
filter and clean under running water if necessary.
 Replace damaged filter.
Subject to technical modifications!
Finish operation
Empty the container
Storing the appliance
Care and maintenance
Special accessories
Troubleshooting
Decreasing cleaning power
Technical specifications
Mains voltage
1~50-60 Hz 220 - 240 V
Mains fuse (slow-blow) 13 A
Container capacity 12 l
Water intake with handle 5,5 l
Water intake with floor noz-
zle 3,0 l
Output P
nom
1000 W
Power cord H 05VV-F2x0,75
Weight
(without accessories) 4,6 kg
Sound pressure level
(EN 60704-2-1) 77 dB(A)
8 EN