Kärcher SB-Wash-E 10, Руководство пользователя

Страница: 32 / 44

-
11

Danger!
Danger of burning because of hot oil and
hot equipment. Let the pump cool down for
15 minutes before making the oil change.
Notice
Used oil may only be disposed at an appro-
priate collection station.. Please deposit the
used oil there. Polluting the environment
with used oil is an offence.
1 Lid of the oil container
2 Oil outlet screw
 Prepare a collecting vessel for used oil
 Remove the lid of the oil container.
 Take the oil outlet screw off and collect
the used oil.
 O-ring 11x2 (order number: 6.362-458)
change it and put the oil outlet screw
back on..
 Pour the oil into the oil container till the
mark MAX.
 Lock the oil container with the lid.
 Take the used oil to the used oil collec-
tion station.

Danger!
There is danger of injury while working at
the equipment.. Concerning all works
 disconnect the input water, close the
water supply,
 disconnect the power supply, shut off
the customer emergency main switch,
and secure, that it can not be turned on.
Notice
If the main power supply is interrupted
(main power supply interruption, customer
emergency off main switch is put to „0“) the
clock in the control head of the base ex-
changer will stop and must be readjusted.

Danger!
danger of injury because of possible dam-
aged parts of the high pressure jet, danger
of burns because of hot equipment parts..
When working, while the equipment is open
take special care, and obey all safty notic-
es!.
The following parts are possible to be hot-
ter than 50 °C:
–
Warm water tank
–
cylinder head of the high pressure
pump
–
high pressure hose
–
Operator
Performances containing the notice
"operator" may only be performed by in-
structed individualls, who are able to
operate and service high pressure
equipment.
–
Electrician
Individuals with an education in the
electric field.
–
Maintenance
Performances with the notice "mainte-
nance" may only be performed by the
Kärcher- Maintenance-Mechanics.
1 Indicator lamp for heating is activated
2 Control light water softener empty (op-
tional), regeneration (optional)
If the lower washing period display blinking
red, then an interruption is shown at the
control circuit.
Maintenance Works
Change oil
Troubleshooting
Who may take care of interrup-
tions?
Fault indication
At the operating panel
In the washing period display
32 EN