Kärcher SB-Wash-E 10, Руководство пользователя

Страница: 30 / 44

-
9
1 Control box
2 Display control circuit board
3 Swimmer tank for warm water
4 Swimmer tank for cold water
5 Container for softener (RM 110, optional)
6 High pressure pump
7 Anti freeze thermostat
8 Operating panel
9 Control head (optional)
10 Base exchanger (optional)
11 Fan heater
12 Strainer
13 Salt tank (optional)
14 Seal
15 Swimming container anti freeze
16 Centrifugal pump
17 Filter anti freeze pump
18 Strainer
19 Screw connections
The bases of a safe operating of the equip-
ment is thr regularly maintenance accord-
ing to the following maintenance plan.
Use only original parts of the manufacturer
or part suggested by him, such as
–
parts and wearing parts,
–
accessories parts,
–
operating materials,
–
cleaning agents.

Danger!
There is danger of injury while working at
the equipment.. Concerning all works
 disconnect the input water, close the
water supply,
 disconnect the power supply, shut off
the customer emergency main switch,
and secure, that it can not be turned on.
Notice
If the main power supply is interrupted
(main power supply interruption, customer
emergency off main switch is put to „0“) the
clock in the control head of the base ex-
changer will stop and must be readjusted.
–
operator
Performances containing the notice "opera-
tor" may only be performed by instructed in-
dividualls, who are able to operate and
service high pressure equipment.
–
Maintenance
Performances with the notice "mainte-
nance" may only be performed by the
Kärcher- Maintenance-Mechanics.
In order to guarantee a reliable operation of
the equipment, we success, you signed a
maintenance agreement. Please refer to
your local Kärcher service department.

Danger!
danger of injury because of possible dam-
aged parts of the high pressure jet, danger of
burns because of hot equipment parts..
When working, while the equipment is open
take special care, and obey all safty notices!.
The following parts are possible to be hot-
ter than 50 °C:
–
Warm water tank
–
cylinder head of the high pressure
pump
–
high pressure hose
Maintenance and care
System overview
Maintenance instructions
Who may perform maintenance?
Maintenance contract
30 EN