Maintenance/Repair
26/52
Pos : 12.17 / 9 Wart ung/ Ins tandsetzung/ Warnt ext El ektr of achkr af t @ 0 \ mod_1264055838943_131.doc x @ 1680 @ @ 1
•
These works may only be carried out by an electrician.
Pos : 12.18 / 1 Grundlegende Sic her hei tshi nweise/Sic her hei tsinfor mationen Wec hs elstrom- Ger ät e/ vor Beginn j eder Arbeit.. .. frei z usc halten @ 0\ mod_1269594559993_131. doc x @ 3730 @ @ 1
• Before starting any work on the industrial vacuum cleaner, but particularly before opening covers of
live or moving parts, the industrial vacuum cleaner or system must be correctly disconnected from
the mains and the drive unit must have stopped
Pos : 12.19 / 1 Grundlegende Sic her hei tshi nweise/Sic her hei tsinfor mationen Wec hs elstrom- Ger ät e/Die üblic hen Sicherheitsr egel n laut en hi erbei z .B. nac h VDE 01 05 @ 0\ mod_1269594914059_131. doc x @ 3748 @ @ 1
•
The usual
safety regulations
are, for example, in accordance with
VDE 0105
:
– Disconnect from mains
– Provide a safeguard to prevent unintentional restarting
– Check that the equipment is not live
– Cover or shield adjacent live parts.
Pos : 12.20 / 9 Wart ung/ Ins tandsetzung/T abelle Wart ungsint er vall e, Ü berschrif t @ 0 \ mod_1263810791405_131.doc x @ 1564 @ 2 @ 1
9.2
Maintenance intervals table
Pos : 12.21 / 9 Wart ung/ Ins tandsetzung/RI /Tabelle Wart ungsi nter vall Spänes a uger Wechs elstr om @ 0\ mod_1269592589773_131.doc x @ 3717 @ @ 1
Interval
Inspection
Measure
Daily
Baffle plate correctly inserted?
Suction tube leaking? (see List of wear
parts)
Collecting tank full?
Bag-type filter soiled? (see List of wear
parts)
Seal between drive unit and collecting
tank (see List of wear parts)
Insert correctly
Replace tube
Empty collecting tank
Clean filter
Clean or replace seal
Weekly
Collecting tank
Clean
Monthly
Level control and discharge tube
Inspect carbon brushes (see List of
wear parts)
Clean
Replace if necessary
Annually
Drive unit
BGV A3 inspection
Pos : 12.22 / 1 Grundlegende Sic her hei tshi nweise/Signal wort-F eld "Hinweis" @ 0\ mod_1261404960439_131.doc x @ 905 @ @ 1
NOTICE
Pos : 12.23 / 9 Wart ung/ Ins tandsetzung/R einigung G erät @ 2 \ mod_1340195497910_131.doc x @ 17554 @ 2 @ 1
9.3
Cleaning
Dust on the appliance must be avoided and must be removed by regularly cleaning.
Before cleaning the device, be sure to switch off the motor protection switch and unplug the device from the
power supply. Cleaning can take place with a damp cloth or a suitable industrial vacuum cleaner. Do not use
solvents such as thinner, alcohol or benzene. Never immerse the device in water.
Pos : 12.24 / 0 Allgemeines/ Sei tenumbruch @ 0\ mod_1265272007940_0. doc x @ 2191 @ @ 1
