– 4
–
When cleaning previously shampooed
carpets, foam will be generated in the
dirt water reservoir. In such a case add
Foam ex RM 761 to the dirt water reser-
voir.
If you require further information please re-
quest the product information sheet and the
DIN safety data sheet for the respective
cleaning agent.
Switch off the spray and suction switch-
es.
Shortly activate the lever on bender to
decrease the pressure.
Separate bender from the spray/suction
hose.
Remove the lid.
Insert the suction hose into the fresh
water reservoir.
see Figure 9
Press the suction switch to turn on the
suction turbine.
Empty the fresh water reservoir and
switch the appliance off.
Remove the dirt water reservoir from
the appliance and empty it.
Connect the bender (with suction pipe
and nozzle) to the suction hose.
Connect the coupling of the fresh water
hose to the bender and lock into place.
Fill approx. 2 litres of fresh water into
the fresh water reservoir.
Do not add any detergents.
Place nozzle into the dirt water reser-
voir.
Press the spray switch to turn on the de-
tergent pump.
see Figure 10
Activate lever on bender and flush the
appliance for appr. 1 to 2 minutes.
Turn off the appliance.
Disconnect the mains plug from the
socket.
Remove the dirt water reservoir from
the appliance and empty it.
Clean the external surfaces of the appli-
ance.
Caution
Risk of injury and damage! Observe the
weight of the appliance when you transport
it.
For transport, place suction pipe on the
carrying handle and attach spray/suc-
tion hose to hook.
When transporting in vehicles, secure
the appliance according to the guide-
lines from slipping and tipping over.
Caution
Risk of injury and damage! Note the weight
of the appliance in case of storage.
This appliance must only be stored in inte-
rior rooms.
Detergent
Carpet and upholstery
cleaning
RM 760 pow-
der
RM 760 tabs
RM 764 liquid
Defoaming
RM 760
Waterproofing carpets
RM 762
Mite removal
RM 765 Mitex
Shutting down
Empty the fresh water reservoir
Cleaning the device
Transport
Storage
12
EN