Kärcher NT 80/1 B1 M S, Руководство пользователя

Страница: 17 / 230

– 6
– In the framework of maintenance and
repair work all contaminated objects
that cannot be cleaned satisfactorily
must be disposed of. Such objects must
be disposed of in impermeable bags in
accordance with the valid provisions for
the disposal of such waste.
– During cleaning or repair of the vacuum
cleaner after a period of inactivity, one
must expect a friction-sensitive, explo-
sive-containing crust. This crust must
first be removed with moisture.
몇
WARNING
Safety equipment for preventing hazards
must be serviced and maintained regularly.
This means that the manufacturer's staff or
persons trained by the manufacturer must
check the equipment for proper functioning
at least once a year, i.e. check for leaks, fil-
ter damage, functioning of the controlling
elements, etc.
– No outside help is required for carrying
out basic maintenance and cleaning.
– The appliance surface and the inside of
the container should be cleaned regu-
larly using a damp cloth.

DANGER
Risk due to dust hazardous to health. Al-
ways use disposal clothing and P2 or higher
breath-safe masks while carrying out main-
tenance tasks (such as changing filters).
 DANGER
Risk of explosion. Due to hazardous reac-
tions of oxidants such as chlorates and per-
chlorates with organic, combustible sub-
stances, an enrichment of oxidants in the fil-
ter must be prevented by frequent disposal.

Release the container locks on both
sides by pulling them upwards.

Remove the suction head with handle
and keep it on the rear side.

Unscrew domed cap nut and lift off
earth cable with both serrated lock
washers.

Unscrew the knurling screw.

For a dust-free exchange, place a plas-
tic bag over the cartridge filter.

Unscrew the cartridge filter and replace
it with a new one.

Thread on serrated washer on grub
screw.

Attach earth cable lug.

Thread on second serrated lock washer.

Screw on domed cap nut and tighten.

Attach the suction head to the container
and lock it with the container locks.
 DANGER
Risk of explosion. Due to the propellant res-
idue, the cartridge filter must be burned or
burned out. When burning cartridge filters
containing chlorate are burned, explosions
can be expected.
Note: Ensure proper seating of the suction
head (fixation), the On/Off switch must be
located in the back.

Dispose of the used filter element in a
dust-tight bag according to the statutory
provisions.

Remove the dirt that has accumulated
on the pure air side.
 DANGER
First pull out the plug from the mains before
carrying out any tasks on the machine.

DANGER
Have all checks and works on electrical
parts performed by an expert.

Check the receptacle and the fuse of
the power supply.

Check the power cable and the power
plug of the device.

Turn on the appliance.
– Water level in the container too low.
The fill level sensor prevents the switch-
ing on of the suction turbine for safety
reasons.

Fill the container with water to the cen-
tre of the sight glass.
Change cartridge filter
Troubleshooting
Suction turbine does not run
16 EN