English
5.906-709.0 Rev. 00 (11/14)
13
Remove suction head from the dirt receptacle.
1 Suction head lock
2 Rivets
Drill out rivets.
Remove locking mechanism.
Fasten the locking mechanism by means of new rivets.
Remove the accessories on the back of the bumper.
Remove the suction hand.
Empty the dirt receptacle.
Place the dirt receptacle on the side.
1 Tensioning ring
2 Bumper
3 Dirt receptacle bottom
Remove clamping ring.
Remove bumper.
Remove the suction hand.
Empty the dirt receptacle.
1 Holder accessories
2 Screws
3 Push handle
Unscrew the screws.
Pull the push handle out of the bumper.
Remove the accessories holder from the push handle.
ABVS Uninstall / install locking mechanism suction head
ABBU Uninstall / install bumper
ABHZ Uninstall / install holder accessories
