Kärcher NT 14/1 Ap Adv L, Руководство пользователя

Страница: 20 / 244

– 6
 Insert new flat-folded filter.
 Close the filter door, it must lock into
place.
 Release and remove the suction head.
 Turn the suction basket by 180° and
keep it aside.
 Unlock the filter frame and remove it.
 Remove the exhaust filter from the filter
frame.
 Insert new exhaust filter into filter frame
as per appliance overview.
 Insert the filter frame so that the X is
pointing toward the outside.
 Let the filter frame lock in.
 Insert and lock the suction head.
Illustration
 Release and remove the suction head.
 Pull the paper filter bag/fleece filter bag
towards the rear.
 Pull the locking slide up and seal the pa-
per filter bag/fleece filter bag tightly
when removing it.
 Dispose of the used paper filter bag/
fleece filter bag according to the local
provisions.
 Insert the new paper filter bag/fleece fil-
ter bag.
 Insert and lock the suction head.
 Release and remove the suction head.
 Clean the electrodes with a brush.
 Insert and lock the suction head.

DANGER
First pull out the plug from the mains before
carrying out any tasks on the machine.
Note: In case of a failure (e.g. filter break-
age) the appliance must be turned off im-
mediately. The failure must be remedied
before the appliance is put into operation
again.
 Check the receptacle and the fuse of
the power supply.
 Check the power cable, the power plug,
the electrodes and possibly the recep-
tacle of the device.
 Turn on the appliance.
 Empty the container.
 Turn off the appliance and wait for 5 sec-
onds, turn it on again after 5 seconds.
 Clean the electrodes as well as the
space between the electrodes with a
brush.
 Remove choking of suction nozzle, suc-
tion tube, elbow, handle, suction hose,
or flat folded filter.
 Replace the full paper or fleece filter bag.
 Press and hold the button on the handle
and press the button for the semi-auto-
matic filter cleaning 5 times.
 Ensure the filter cover properly locks
into place.
 Replace the flat pleated filter.
 Clean the exhaust filters under running
water and let them dry off.
 Check for proper installation of the flat
pleated filter.
 Ensure the filter cover properly locks
into place.
 Replace the flat pleated filter.
 Clean the exhaust filters under running
water and let them dry off.
 Clean the electrodes as well as the
space between the electrodes with a
brush.
Replace the exhaust filter
Replacing the paper filter bag/fleece
bag
Cleaning the electrodes
Troubleshooting
Suction turbine does not run
Suction turbine turns off
Suction turbine does not start again
after the container has been
emptied
Suction capacity decreases
Dust comes out while vacuuming
Automatic shut-off (wet vacuum
cleaning) does not react
20 EN