– 8
Î
Position 0
: The appliance is
switched off. Electric tool is sup-
plied with voltage.
Note
: Observe the maximum connect-
ed load (see Chapter "Technical da-
ta").
Illustration
Î
To connect an electric tool.
Illustration
Î
Connect the suction hose to the
blower connection, this will activate
the blower function.
Illustration
Î
For cleaning the flat pleated filter fit-
ted.
Note:
Do not operate the button when
the flat pleated filter is wet.
Î
After unlocking it, grab the appli-
ance head by the handle recess
and remove it.
Illustration
Î
The carrying handle is also used to
lock the appliance head and the
container. To unlock, push the bow
all the way forward until you clear
the lock.
Î
Grab the appliance head by the
handle recess and remove it.
Illustration
Illustration
Î
In order to clean the filter, press the
release key, fold out and remove
the filter box.
Illustration
Î
The accessories compartment al-
lows the storage of suction pipes
and suction nozzles on the appli-
ance.
Illustration
Î
To store the mains cable.
Illustration
Î
To rest the floor nozzle during work
interruptions.
Illustration
Î
Turn the container, press in the
steering roller in the openings at the
base of the container till the end-
point.
Illustration
Î
The drain screw is used to quickly
and comfortably empty wastewater
in the container. Tilt the container
forward for easier emptying.
Illustration
Note
: Do not use a filter bag for wet
vacuuming!
CAUTION
Always work with an inserted flat fold
filter - during wet as well as dry vacuum
cleaning!
Machine socket
Blowing connection
Filter cleaning button
Recessed grip
Carry handle
Filter box and release key
H
2
Accessory mount
Cable hook
Parking position
Steering roller
Drain screw
Filter bag
Flat fold filter
(already installed in the appliance)
(1