background image

12 

English

DANGER

Risk of electric shock.

Prior to all work on the appliance, switch off the ap-
pliance and pull the power plug.

The high pressure hose is specially constructed with re-
inforced walls to handle water pressure up to 16 MPa 
(2400 psi) - it can be easily damaged and should be 
stored carefully.

Do not kink.

Do not drive vehicles over the hose.

Do not expose the hose to sharp edges or corners.

Misuse will lead to ballooning or premature failure and 
will invalidate warranty.

Clean the sieve in the water connection regularly.

Remove coupling from the water connection.

ATTENTION

The sieve must not be damaged.

Illustration 

Pull the sieve out using flat pliers.

Clean the sieve under running water.

Reinsert the sieve into the water connection.

The batteries are depleted if nothing is shown on the 
display of the trigger gun anymore.
Two batteries or accumulators of the size AAA are re-
quired.
Illustration 

Push the locking slide.

Open battery compartment.

Remove the batteries.
Dispose of the used batteries according to the local 
provisions.

Insert new batteries and observe the correct orien-
tation of the terminals.

Close battery compartment.

DANGER

Risk of electric shock. Turn off the appliance and re-
move the mains plug prior to performing any care and 
maintenance work.
Repair work and work on the electrical components may 
only be performed by an authorised customer service.

You can rectify minor faults yourself with the help of the 
following overview. 
If in doubt, please consult the authorized customer service.

Push the lever of the trigger gun, the device will 
switch on.

Check whether the voltage indicated on the type plate 
corresponds to the voltage of the mains supply.

Check the mains connection cable for damages.

Motor overloaded, the motor circuit breaker has 
tripped.

Turn off the appliance "0/OFF".

Allow the device to cool down for 

one hour

.

Switch on the device and put it into operation again.
If the malfunction occurs repeatedly, have the de-
vice checked by the customer service.

Voltage reduction due to weak mains supply or when 
using an extension cable.

Upon switch-on, push the lever of the trigger gun 
first and then switch the power switch to "I/ON".

Check setting at the spray lance.

Check water supply for adequate delivery rate.

Pull out the sieve in the water connection using flat-
nose pliers and clean under running water.

Remove air from appliance before operation.
Switch on the appliance without connection the HP 
hose (max. 2 minutes) and run it until the water dis-
charging from the HP outlet is free of bubbles. 
Switch off appliance and reconnect HP hose.

Clean high-pressure nozzle: Remove dirt and de-
bris from the nozzle bore, using a needle and rinse 
through with water from the front.

Check water flow quantity.

Dropwise leakage of the device is normal for tech-
nical reasons. If the leakage increases contact the 
authorized customer service.

Use Vario Power spray lance.
Turn the spray lance to "Mix" position.

Check whether the Plug 'n' Clean detergent bottle 
is placed into the detergent connection facing 
down.

Check / replace the batteries

KÄRCHER UK Limited operates a helpline allowing 
customers to discuss any problems experienced with 
our products.
The helpline operates during normal business hours 
and may be busy at peak periods.If you have difficulty 
getting through we would ask that you try to contact us 
again later in the day.

The helpline number is 01295 752200, open from 
8.30 am to 5.00 pm 
Monday to Friday. 

It helps us if you have the model number and data plate 
details to hand before making your call so that we can 
assist you with your query more effectively.

Alternatively you may write to us at the address be-
low

:

KÄRCHER UK Ltd
Kärcher House
Beaumont Road
Banbury
Oxon, OX16 1TB

or E-mail us

:

[email protected]

Care and maintenance

High pressure hose

Clean the sieve in the water connection

Changing the batteries of the trigger gun

Troubleshooting

Appliance is not running

Appliance does not start, motor hums

Pressure does not build up in the appliance

Strong pressure fluctuations

Appliance is leaking

No detergent infeed

No pressure indicator on the trigger gun

Helpline

 

 

 

Содержание K 7 Compact















Отзывы: