English
7
STEP 5:
Insert detergent suction tube onto
the hose fitting.
Install the dosage regulator and con-
nect using 2 screws.
Note
: During installation you must
make sure that the tongues of the
dosage regulator match up with the
intended recesses in the casing.
STEP 6:
Slide the free end of the coiled high
pressure hose through the recesses
on the dosage regulator.
Insert the hose drum into the intakes
on the transport handle.
Insert the axle of the hand crank into
the guides.
Rotate and press until the crank
locks in.
Install the holder bracket and secure it
using 2 screws.
Install the dosage regulator for
detergent
Install the high pressure hose drum
