Kärcher K 5.610, Руководство пользователя

Страница: 18 / 246

– 6
 Illustration
Remove the lid from the Plug 'n' Clean de-
tergent bottle and press the detergent bot-
tle into the detergent connection with the
opening facing down.
 Illustration
Adjust the suction volume of the detergent
solution by means of the dosage regulator
for detergents.
 Use spray lance with pressure regulation
(Vario Power).

Turn the spray lance to "Mix" position.
Note: This will mix the detergent with the
water stream.
Note : If required, the washing brushes can be
used to work with detergent.
 Spray the detergent sparingly on the dry
surface and allow it to react, but not to dry.
 Spray off loosened dirt with the high-pres-
sure jet.

Release the lever on the trigger gun.

Lock the lever on the trigger gun.
 During longer breaks (more than 5 min-
utes), also turn the appliance off using the
"0/OFF" switch.

Insert the trigger gun in its holder.
Caution
Only separate the high-pressure hose from
the trigger gun or the appliance while there is
no pressure in the system.
 Remove the Plug 'n' Clean detergent bot-
tle from the intake and close it with the lid.
To store, place into the intake rotated by
180°.

Release the lever on the trigger gun.
 Turn off the appliance "0/OFF".
 Turn off tap.

Detach the appliance from the water supply.
Caution : When disconnecting the supply
or high pressure hose, warm water may
leak from the connections after operation.

Press the lever on the trigger gun to release
any remaining pressure in the system.
 Lock the lever on the trigger gun.
 Pull out the mains plug.
Caution
In order to prevent accidents or injuries, keep
in mind the weight of the appliance during
transport (see Specifications).

Lift appliance by the carrying handle and
carry it.

Pull the appliance by its transport handle.
 Prior to horizontal transport: Remove the
Plug 'n' Clean detergent bottle from the in-
take and close it with the lid.
 Secure the appliance against shifting and
tipping over.
Caution
In order to prevent accidents or injuries, keep
in mind the weight of the appliance when se-
lecting a storage location for it (see Specifica-
tions).
 Park the machine on an even surface.
 Press the disconnect on the hand spray
gun and remove the high pressure hose
from the hand spray gun.
 Push the casing of the quick coupling for
the high pressure hose toward the rear
and disconnect the high pressure hose
from the appliance.

Insert the hand spray gun with the spray
lance into the holder for the hand spray
gun.
 Stow away the mains cable, the high-
pressure hose and accessory at the appli-
ance.
Prior to extended storage periods, as during
the winter, also observe the instructions in the
Care section.
Recommended cleaning method
Interrupting operation
Finish operation
Transport
When transporting by hand
When transporting in vehicles
Storage
Storing the Appliance
18 EN