Kärcher iSolar 400 Скачать руководство пользователя страница 9

Страница: 9 / 116



If a ball tap (special accessories) is in-
stalled between the high-pressure hose
of the high-pressure cleaner and the
spray lance, you can work with the
standard spray lance of the high-pres-
sure cleaner or with the special acces-
sory flexible spray lance.

– Moisten the first row of modules using

the water hose. This removes stubborn
soiling and the scrubbing of the brush
on a dry surface is avoided.

– Cleaning from the roof ridge: Clean the

modules from top (telescopic lance re-
tracted) to bottom (telescopic lance ex-
tended).

– Cleaning from lifting platform/scaffold:

Clean the modules from top (telescopic
lance extended) to bottom (telescopic
lance retracted).

– Clean larger surfaces in sectors.
– When retracting or extending the tele-

scopic lance, point the stop-cock to-
wards the bottom. This allows for a bet-
ter feeding of the hose.

– Only possible with heated high-pres-

sure cleaners (HDS appliances):
If required, we recommend the use of
the detergent RM 99.
Set the temperature to max. 40 °C.

– For high-pressure cleaners with adjust-

able water quantity:
Work with the maximum water quantity.

– Employ at least 2 people to perform the

cleaning work, assistance with trailing
the free hose length or to operate the
high-pressure cleaner.

– A safe workplace during cleaning, lifting

platforms.

Note

: Please read and observe the safety

instructions prior to use!



DANGER

Ensure firm footing during cleaning work.
Torque due to rotating brush, hold tightly on
to the telescopic lance during work, espe-
cially when the telescopic lance is com-
pletely or far extended.

CAUTION

Mind the maximum cleaning temperature of
40 °C! There is a risk of the brush drive be-
ing damaged with higher temperatures.
In case of blocking brushes, pay regard to
the troubleshooting section.

Move the telescopic lance only lengthwise
during work, not sideways.



Operate the high pressure cleaner as
instructed in the operating instructions.

Illustration



Extend telescopic lance if necessary:
Open the locking lever and pull the
pipes out to the required length.

Note

: Always start by extending the

front (thinner) pipes first.



Close locking lever.

Illustration



Open stop-cock and start cleaning.



Close the stop valve.



Switch off the high pressure cleaner.



Open the stop-cock again to release the
pressure still present in the system.



Completely push the telescopic lance
together.



Unscrew the distributor with the clean-
ing brushes from the telescopic lance.



Unscrew both high-pressure hoses
from the telescopic lance.

Illustration



Coil the high-pressure hose of the tele-
scopic lance and secure it on the lance
(by means of cable ties or hook-and-
loop tape).



Store the cleaning brushes in a way that
no bristles are damaged or distorted.



Store the solar cleaning kit in a frost-
protected and dry place.

Note

If a ball tap (special accessories) is in-
stalled between the high-pressure hose of
the high-pressure cleaner and the spray
lance, you can work with the standard

spray lance of the high-pressure cleaner or
with the special accessory flexible spray
lance.



With certain appliances: Stop-cock is
not completely opened.



With closed stop-cock: Leakage in the
system, contact service.

CAUTION

When brush is blocking, close the stop-
cock and switch off the high-pressure
cleaner.



Contact service.



Detergent intake only possible with
heated high-pressure cleaners (HDS
appliances).

