Kärcher ICH 120/14 Ps F2, Руководство пользователя

Страница: 16 / 40

-
2
–
The tank cleaning device consists of
base plate (1), folding rack (2), draw
pipe (3) and two cleaning heads (4) that
are driven by the cleaning liquid. The
tank cleaning device is fastened to a lift-
ing device with the lifting eye bolt (5)
during operation. The folding rack
moves the cleaning heads into the ex-
tended/retracted position (A) or into the
working position (B).
–
In the extended/retracted position, the
draw pipe must be slid down and fas-
tened to the base plate by means of the
transport lock. The cleaning heads are
tilted downwards. In this position, the
tank cleaning device is extended into
the tanks and extracted from them.
–
In the working position, the base plate is
clamped tightly onto the tank dome by
means of the 4 clamping screws be-
longing to the tank wagon. The option-
ally available vacuum/pressure relief
valve (8) equalizes the pressure be-
tween the container and the atmos-
phere. The draw pipe is pulled up to the
mark towards the top by means of the
lifting unit. Here, the cleaning heads are
swivelled into the working position.
–
Steam to heat the tank can be drawn in
via the draw pipe and the steam noz-
zles (6).
–
With containers without a bottom drain
valve, residual fluid can be extracted
through the empty conduit (9) using a
suction device provided by the custom-
er.
–
The nozzles of the cleaning heads ro-
tate around two axles and therefore
cover every spot of the container. The
drive is effected by the cleaning liquid.
–
After the cleaning, air can be chan-
nelled in and out of the tank to dry it via
the two warm air connections (7).
Function
B A
5
1
3
2
4 4 6
7
9
7
8
9
16 EN