Kärcher HDS-E 3.3/25-4M Ec, Руководство пользователя

Страница: 13 / 52

– 7

DANGER
Danger of scalding by hot water. After oper-
ation with hot water, the appliance must be
operated with an open gun with cold water
for at least five minutes to cool it off.
 Set the appliance switch to "0/OFF“.
 Shut off water supply.
 Open the hand spray gun.

Turn on pump shortly (appr. 5 seconds)
with device switch.
 Pull main plug out of socket with dry
hands only.
 Remove water connection.
 Activate hand spray gun until device is
pressure less.
 Lock the trigger gun.
 Lock in the steel pipe into the holder of
the appliance hood.
 Roll up high pressure hose and electri-
cal conduit and hang them into the re-
spective holders.
Note: Do not twist high pressure hose and
electrical conduit.
ATTENTION
Frost will destroy the not completely water
drained device.
 Store in a frost free area.
If it is not possible to store frost free, shut
down device.
For longer work breaks or if a frost free stor-
age is not possible:
 Drain water.
 Flush device with anti-freeze agent.
 Empty detergent tank.
 Screw off water supply hose and high
pressure hose.
 Unscrew the drain screw of the boiler
on the bottom of the boiler and empty
the boiler.
 Operate device for max. 1 minute until
the pump and conduits are empty.
Note: Observe handling instructions of the
anti-freeze agent manufacturer.
 Fill commercial grade anti-freeze into
the boiler.
 Switch on appliance (without heater)
until the appliance has been completely
rinsed.
A certain corrosion protection is achieved
with this as well.
몇
CAUTION
Risk of injury and damage! Note the weight
of the appliance in case of storage.
Figure 6
ATTENTION
Risk of damage! When loading the appli-
ance with a forklift, observe the illustration.
몇
CAUTION
Risk of injury and damage! Observe the
weight of the appliance when you transport
it.

When transporting in vehicles, secure
the appliance according to the guide-
lines from slipping and tipping over.

DANGER
Risk of injury by inadvertent startup of ap-
pliance and electrical shock.
First pull out the plug from the mains before
carrying out any tasks on the machine.
 Set the appliance switch to "0/OFF“.
 Shut off water supply.
 Open the hand spray gun.
 Turn on pump shortly (appr. 5 seconds)
with device switch.
 Pull main plug out of socket with dry
hands only.
 Remove water connection.
 Activate hand spray gun until device is
pressure less.

Lock the trigger gun.
Turn off the appliance
Storing the Appliance
Frost protection
Shutdown
Dump water
Flush device with anti-freeze agent
Storage
Transport
Maintenance and care
13 EN