background image

English

 23

20 High pressure connection

(Only M / S Eco)

21 High pressure hose
22 Hand spraygun
23 Spray lance
24 High pressure nozzle
25 Cover lock
26 Electronic display for maintenance jobs/ 

interruptions

Figure 2

1 Power switch
2 Temperature controller
3 Fuel indicator lamp
4 Liquid softner indicator lamp
5 Indicator lamp : Detergent 1
6 Indicator lamp : Detergent 2

(only HDS 1295)

7 Indicator lamp: Engine/ Electronics
8 “Ready for use” indicator lamp
9 Manometer
10 Dosage valve for detergent

All subsequent specified position numbers 
in this operating instruction are listed in the 
device illustration

Cleaning of: Machines, Vehicles, Struc-
tures, Tools, Facades, Terraces, Garden-
ing tools, etc.

Danger

Risk of injury! Follow the respective safety 
regulations when operating at gas stations 
or other dangerous areas.

– While reducing the water supply at the 

pump head or with the Servopress - reg-
ulation the overflow valve opens and 
part of the water flows back to the pump 
suck side.

– If the hand-spray gun is closed, so that 

the whole water flows back to the pump 
suck side, the pressure switch at the 
overflow valve shuts down the pump.

– If the hand spray gun is opened, the 

pressure switch on the cylinder head 
turns the pump back on.

The overflow valve is set by the manufac-
turer and sealed. Setting only by customer 
service.

– The safety valve opens, when the over-

flow valve resp. the pressure switch is 
broken.

The safety valve is set by the manufacturer 
and sealed. Setting only by customer serv-
ice.

– The water shortage safeguard prevents 

the burner to be turned on when there is 
water shortage.

– A sieve prevents the contamination of 

the safeguard and must be cleaned reg-
ulary.

Operating field

Indication toward operating 

instructions

Proper use

Please do not let mineral oil contaminat-
ed waste water reach soil, water or the 
sewage system. Perform engine cleaning 
and bottom cleaning therefore only on 
specified places with an oil trap.

Safety Devices

Overflow valve with two pressure 

switches

Safety valve

Water shortage safeguard

Содержание HDS 995 M/MX Eco






















Отзывы: