Kärcher HDS 5.0/30-4 S Eb, Руководство пользователя

Страница: 11 / 50

English
11
Î
Connect ray tube with hand spray
gun
Î
Insert high pressure nozzle into cov-
ering nut
Î
Install covering nut and tighten firmly
Figure 1 - Pos. 19
Î
Connect the high pressure host to
the high pressure connection point
of the machine.
Figure 4
Figure 5
For connection values refer to technical
specifications
Figure 1 - Pos. 18
Î
Connect the supply hose to the wa-
ter connection point of the machine
and at the water supply point (for e.g.
a tap).
Note
The supply hose is not included.
If you want to suck in water from an ex-
ternal vessel, the following modification
is necessary:
Î
Remove water connection from the
pump head.
Î
Unscrew the upper supply hose with
the fine filter to the swimmer contain-
er and connect it to the pump head.
Î
Connect suction hose (minimum di-
ameter 3/4“) with filter (accessory) to
the water connection point.
Note
The appliance is fitted with a dry-run
protection mechanism. During suction,
there must always be adequate water in
the swimmer container to ensure that
the appliance does not switch off.
Until the pump sucked in water, you
should:
Î
Turn the pressure and quantity regu-
lation to MAX.
Î
Close the dosing valve for the deter-
gent.

DANGER
Never suck in water from a drinking wa-
ter container. Never suck in liquids
which contain solvents like lacquer thin-
ner, petrol, oil or unfiltered water. The
sealings within the device are not sol-
vent resistant. The spray mist of sol-
vents is highly inflammable, explosive
and poisonous.
For connection values, see technical
data and type plate.
몇
Warning
Check direction of rotation of the engine
at every socket change.
– With correct direction of rotation a
strong airflow can be felt out of the
exhaust opening of the burner.
Î
If the rotational direction is wrong,
get an electrician to interchange the
poles in the appliance plug.
Î
If you have to use an extension
chord, then the same must always
be rolled up and have an adequate
cross-section.
Install hand spray gun
Installing spare high pressure
hose
Installing the handle
Water connection
suck in water from vessel
Power connection