Kärcher HD 10/16-4 Cage Ex, Руководство пользователя

Страница: 20 / 328

– 6
– For strong contaminations
 Set the working pressure and quantity
by pulling hard on the handle on the
hand spray gun. Once the desired wa-
ter stream is reached, this handle posi-
tion can be set via the hand wheel of the
hand spray gun. Once you open it up
again, the water stream will be adjusted
automatically.
 Pull the lever on the handgun.
 Release the lever on the trigger gun.
 Turn the hand wheel on the hand spray
gun to 0 to protect the lever from being
released inadvertently.
 Store the hand spray gun and spray
pipe in the accessory mount.

Turn the knurled nut of the detergent nozzle
in a clockwise direction until it stops.
 Set the appliance switch to "I".
 Open the hand spray gun and rinse the
appliance for at least 1 minute.
 Release the lever on the trigger gun.
 Set the appliance switch to "0".
 Shut off water supply.
 Activate hand spray gun until device is
pressure less.
 Turn the hand wheel on the hand spray
gun to 0 to protect the lever from being
released inadvertently.
 Remove the water inlet hose from the
appliance.
 Pull out the mains plug.

Stow away the mains cable, the high-
pressure hose and accessory at the ap-
pliance.
몇
CAUTION
Risk of personal injury or damage! Mind the
weight of the appliance during transport.
 When transporting in vehicles, secure
the appliance according to the guide-
lines from slipping and tipping over.

Release parking brake.

Push the appliance.
 Connect the lifting device in the center
of the strut to load by crane.

DANGER
Risk of injury due to dropping device.
– Check the strut for crane loading for
damage prior to each transport by
crane.
– Only lift up the appliance by the strut
when loading by crane.
– Secure the lifting device against inad-
vertent load release.
– Remove the spray lance with the trigger
gun prior to transportation by crane.
– The appliance must only be transported
by properly trained crane personnel.
– Do stand below the load.
– Ensure that no persons are present in
the immediate vicinity of the crane.
– Do not leave the appliance on the crane
unattended.
몇
CAUTION
Risk of personal injury or damage! Consid-
er the weight of the appliance when storing
it.
ATTENTION
Risk of damage! Freezing water in the ap-
pliance can destroy parts of the appliance.
For longer work breaks or if a frost free stor-
age is not possible:

Drain water.
 Flush device with anti-freeze agent.
Round jet nozzle
Set working pressure and flow rate
Pressure/ quantity regulation at the
hand spray gun
Interrupting operation
After each operation
After operation with detergent
Finish operation
Transport
Driving
Transport by crane
Storage
Shutdown
20 EN