Kärcher HD 10/16-4 Cage Ex, Руководство пользователя

Страница: 17 / 328

– 3
5 The infeed temperature of the cleaning
liquid water with detergents must not
must not exceed 50 °C.
6 The pump must be checked regularly
for flawless condition and function after
an appropriate operating period (among
others, bearings for wear, pump for
leaks). If applicable, a repair needs to
be conducted.
7 The pump must only be used with
cleaning liquids, whose affect on the
materials is not damaging.
8 Hoses must be conductive (electrostat-
ically) (resistance R < 10
6
Ohm).
Use only original parts.
9 Please follow the national rules and
regulations of the respective country.
Safety devices serve to protect the user
and must not be rendered in operational or
their functions bypassed.
The switch prevents unintented starting of
the appliance. Stop the appliance during
breaks or after operation.
The hand wheel on the hand spray gun in
zero position prevents the appliance from
being switched on unintentionally.
– While reducing the water supply/quanti-
ty regulation at the pump head, the
overflow valve opens and part of the
water flows back to the pump suck side.
– If the hand spray gun is closed, the wa-
ter will flow into the swimmer container
via the overflow valve. This will create a
water circuit.
– If the hand spray gun is opened, the
overflow will close. The spray pressure
will be reactivated.
The overflow valve is set by the manufac-
turer and sealed. Setting only by customer
service.
– With excessive pressure, the safety
valve will open. The emitted cleaning
liquid protects the pump and the high-
pressure hoses from damages by ex-
cessive pressure.
The safety valve is set by the manufacturer
and sealed. Setting only by customer ser-
vice.
The parking brake prevents the appliance
from rolling off.
몇
DANGER
Risk of injury! Device, tubes, high pressure
hose and connections must be in faultless
condition. If they are not in a perfect state
then the appliance must not be used.
 Lock parking brake.
 Cut off tip of oil filling nozzle.
 Check oil level of the high pressure
pump.
The oil level must be between the “MIN“
and “MAX“ markings on the oil contain-
er.
 Add oil if required (see technical speci-
fications).
ATTENTION
Risk of damage! In case of lacteous oil in-
form Kärcher customer service immediate-
ly
 Install the pushing handle on the pipe
frame.
Safety Devices
Power switch
Hand wheel of hand spray gun
Overflow valve
Safety valve
Parking brake
Start up
Check oil level
Installing the pushing handle
17 EN