Kärcher FS 2000, Руководство пользователя

Страница: 8 / 22

English FS 2000 22
Insert cap in pressure vessel
opening
Fit cap
Warning:
Sealing ring must make uniform
contact with pressure vessel
opening!
Flip over fastener and press down
as far as it will go
Connect air hose
Connect to mains
∗
Only work with dry hands
∗
Supply voltage must coincide with
voltage on rating plate
∗
Always completely unwind
extension cable
∗
Permissible cross-section up to
10 m: 1,5 mm², in excess of the
above 2,5 mm²
∗
Only connect splash-proof
extension cables
∗
Extension cable must not be in
water
∗
Only connect unit to sockets
provided with 30 mA residual-
current-operated circuit breaker.
∗
Operation prohibited in baths and
with user standing in water.
−
For connected loads, refer to
Technical Data
Set ON/OFF switch to „0“
Insert power plug
OPERATION
∗
Always wear protective clothing,
mask, protective goggles, rubber
boots and rubber gloves
∗
Only use unit in well ventilated
areas
∗
Never blow into clogged
nozzles or valves
∗
Never reach beneath cover
with unit connected to mains
∗
Avoid contact with hot
components such as compressor
and hose connection
∗
Keep unauthorised persons,
children and animals away from
work area
∗
Unit is only to be used in
upright position!
∗
Never expose unit to sunlight
when pressurised!
∗
Never use on materials containing
asbestos, silicone, lead or other
hazardous substances!