Kärcher FP 306, Руководство пользователя

Страница: 11 / 144

6
Deutsch

Risk of injury
Turn off the appliance and remove the mains
plug prior to any care and maintenance works.
몇
Caution
Do not use abrasives, glass or universal clean-
ers! Never immerse the appliance in water.
Î
Remove and tap the polishing pads after
every use. Wash and dry as needed.
Note : Can be washed at 60 °C; please do
not use any soft detergents, do not dry in
dryer.
Î Place dry polishing pads into the storage
compartment.
Change the filter bag at regular intervals.
Î
See Chapter "Inserting a filter bag".
Check the state of the polishing pads at regu-
lar intervals; replace them if they are worn out.
Î
See Chapter "Insert the polishing pads".
The terms of the guarantee applicable in each
country have been published by our respec-
tive national distributors. We will repair possi-
ble faults on your unit free of charge within the
warranty period, insofar as the faults are
caused by material defects or defective work-
manship. Guarantee claims should be ad-
dressed to your dealer or the nearest
authorized customer service centre, and sup-
ported by documentary evidence of purchase.
(See address on the reverse)
Our KÄRCHER branch will be pleased to help
you further in the case of questions or faults.
(See address on the reverse)
At the end of the operating instructions you
will find a selected list of spare parts that are
often required.
You can procure the spare parts and the attach-
ments from your dealer or your KÄRCHER
branch office.
(See address on the reverse)
„
This sound is caused by the system. The
appliance was not stored with the trans-
port lock activated. This sound will disap-
pear on its own after a while during
polishing.
Subject to technical modifications!
Maintenance and care
Cleaning the appliance and accessories
Cleaning the polishing pads
Replacing the filter bag
Replacing polishing pads
General notes
Warranty
Customer Service
Ordering spare parts and special attachments
Troubleshooting
Discs running unevenly / rattling sound
Technical specifications
Voltage 230 V
Current type 1~50/60 Hz
Protective class II
Connected load 600 W
Rotating speed, polishing
discs 1000 rpm
Weight 7 kg
Dimensions 385 x
340 x
1155
mm
Volume, filter bag 4 l
English 11