Kärcher EDI 4, Руководство пользователя

Страница: 22 / 24

22 English
Troubleshooting guide

DANGER
Contact with live parts
Injury due to electric shock
Before carrying out any work on the
device, switch it off and disconnect it
from the charger.
Have repair work and work on electri-
cal components carried out only by au-
thorized Customer Service personnel.
The charge level indicator is flash-
ing quickly.
The charging/ambient temperature is
too low or too high.
 Note the permissible temperature
ranges (see chapter
Technical da-
ta ).
 Wait until the charge level indicator
stops flashing or press the power
switch for 3 s.
The abrasive disk is blocked.
 Wait until the charge level indicator
stops flashing or press the power
switch for 3 s.
 Check the device for blockages and
remove them if necessary.
a Make sure that the device is
switched off.
b Carefully remove the blockages.
The load is too high.
 Wait until the charge level indicator
stops flashing or press the power
switch for 3 s.
The abrasive disk is rotating without
the trigger switch being activated.
 Wait until the charge level indicator
stops flashing or press the power
switch for 3 s.
The device is not de-icing properly.
The abrasive disk is damaged.
 Replace the abrasive disk (see
chapter
Replacing the abrasive
disk ).