BR/BD 55/60 WP
Basic settings and servicing
Page 22 / 25
Service Information International 02.2003
Microswitch (S6) for suction motor
The microswitch (3) is located underneath the
control panel on the drive control. The micro-
switch (3) is activated when the suction beam is
lowered. It switches on the suction motor and the
control lamp lights up on the control panel.
To replace the microswitch (3), the control panel
has to be opened by loosening the fastening
screws.
The microswitch (3) cannot be adjusted.
Adjust suction beam
The suction beam can be adjusted for any type
of floor surface, in inclination and pivoting angle.
The inclination is adjusted with the wing nuts (1)
and the pivote angle with the star knob nuts (2).
Suction beam inclination setting
Drive control
1
Wing nuts, inclination adjustment
2
Star nob nuts, pivoting angle adjustment
3
Microswitch S6
Basic settings and servicing
1
2
1
2
3
