BR/BD 55/60 WP
Basic settings and servicing
Page 19 / 25
Service Information International 02.2003
Message on the display
Explanations
Sxxx vxxx Pxxx cx sx
Just electronic information
+=xxx mV–=xxxxmV
Just electronic information
nax blx rdx bcx
Additional electronic information:
After-running time brush motors
0 - 5 seconds depending on the "Brush delay"
setting
Magnet sensor drive control
0 = closed
1 = open
Battery voltage
0 = voltage > deep-discharge protection
1 = voltage < deep discharge protection or
EMERGENCY STOP switch pressed
EMERGENCY STOP switch
0 = not pressed
1 = pressed
To leave the debug mode, switch the machine
off with the key switch. The debug mode
changes automatically to the OFF setting.
Debug-Mode