BR/BD 55/60 WP
Basic settings and servicing
Page 18 / 25
Service Information International 02.2003
Debug-Mode
Access the debug menu
With the debug menu, the user can call
additional information.
1. In the set-up mode, call the "Debug mode"
message.
2. Press the "Settings" button to switch the
debug mode ON.
3. Carry on switching the "Info" button until
the message "SET-UP exit?" appears in
the display.
4. Press "Settings" to confirm.
5. Press "Info" to access the following
information:
Message on the display
Explanations
Battery
Shows the current battery voltage.
CleanSpdFwd=60%
Shows the adjusted cleaning speed for
forwards as % of maximum speed.
CleanSpdRev=60%
Shows the adjusted cleaning speed for
reverse as % of maximum speed.
Hours 1h23m
Shows the current operating hours in hours (h)
and minutes (m).
Speed.: 0.0mph
Shows the current travelling speed in mph.
Alfred Kärcher
Indicates the manufacturer.
BR/BD55/60 2.12
Indicates the installed software version.
Pxxx Ixx Bxxx Txxx
Display for additional electronic functions:
Electronic information only
Current consumption brush motors in A
(0 -150)
Current consumption drive motor in A (0-50)
Speed value (0-255)A
12345
value of 250 to
255 must appear when the driving lever is
pushed to max. limitstop.