Kärcher BD 40/25 C Eco Bp, Руководство пользователя

Страница: 27 / 380

– 11
To ensure a reliable operation of the appli-
ance maintenance contracts can be con-
cluded with the competent Kärcher sales
office.
In case of danger of frost:
 Empty the fresh and waste water tank.
 Store the appliance in a frost-protected
room.

DANGER
Risk of injury. Turn the program selection
switch to "OFF" and disconnect the mains
plug before performing any works on the
appliance.
Place the appliance on a stable, even sur-
face and disconnect the battery.
 Drain and dispose of the dirt water and
the residual fresh water.
In case of faults that cannot be remedied
using the table below please contact the
customer service.
Maintenance contract
Frost protection
Faults
Faults with display
Battery control
display Fault indi-
cation Fault Remedy
– blinks rapid-
ly Excess temperature
in brush drive Set the program selection switch to
OFF and let the machine cool down.
– blinks slow-
ly Cable routing fault,
interruption Set program switch to OFF. Then se-
lect again the cleaning program. If the
fault recurs, call customer service.
– glows Failure in the elec-
tronics
blinks red fast blinks rapid-
ly Battery defective
slowly blinks red blinks slow-
ly
Overload on brush
motor Set program switch to OFF. Check
whether foreign matters are blocking
the brushes, remove foreign matter if
required Then select again the clean-
ing program. If the fault recurs, call
customer service.
27 EN