– 10
ATTENTION
Risk of damage. Do not sluice the appli-
ance with water and do not use aggressive
detergents.
Drain off dirt water.
Check the fluff filter, clean if required.
Clean the outside of the appliance with
a damp cloth which has been soaked in
mild detergent.
Clean the vacuum lips and the splash-
guard, check for wear and replace if re-
quired.
Check the brushes for wear, replace if
required.
Charge battery if required.
During operating pauses: recharge the
battery.
Check battery poles for oxidation, brush
off if necessary.
Check the connection cable for tight fit.
Check the condition of the seals be-
tween waste water tank and cover, re-
place if required.
Check the acid density of the cells if the
batteries are not maintenance-free bat-
teries.
Clean the brush tunnel (only BR mod-
el).
Have the prescribed inspection carried
out by the customer service.
Remove the vacuum bar.
Unscrew the star grips.
Remove the plastic parts.
Remove the vacuum lips.
Insert new vacuum lips.
Insert the plastic parts.
Screw in and tighten the star grips.
Empty the waste water tank.
Press the appliance to the bottom using
the push handle.
Turn the running gear to the front with
your foot.
Press in the brush and remove down-
wards.
Insert the new brush roller and lock into
place.
Turn the running gear to the back with
your foot.
Empty the waste water tank.
Press the appliance to the bottom using
the push handle.
Turn the running gear to the front with
your foot.
Turn the button for the setting of the ad-
vance speed in – direction.
Raise the disk brush.
Turn the disk brush by approximately
45°.
Remove the disk brush at the bottom.
Insert the new disk brush in reverse se-
quence.
Set the advance speed.
Turn the running gear to the back with
your foot.
Maintenance schedule
After the work
Monthly
Yearly
Maintenance Works
Replacing the vacuum lips
Replacing the brush rollers
Replacing the disk brushes
26
EN
Содержание BD 40/25 C Eco Bp
Страница 2: ...2 ...
Страница 380: ...http www kaercher com dealersearch ...