![background image](http://html1.mh-extra.com/html/karcher/b-80-w-bp/b-80-w-bp_service-manual_3579740011.webp)
English 5.906-468.0 Rev. 00 (02/09)
11
You can use the debug mode to call up additional information.
Î
Call up the "debug mode" display in the setup menu.
Î
You can use the info button to set the debug mode to ON.
Î
Keep turning the info button until "SETUP exit?" appears on the
display.
Î
You can use the info button to confirm the settings.
Î
The following information can now be retrieved by using the
info button:
4.4.3
Open the debug mode
Display on the moni-
tor
Explanations
Battery: 26,0V
Displays the current battery voltage.
Water
Displays the current water volume.
CleanSpdFwd=60%
Shows the set cleaning speed during
forward drive in % of the max. value (is
only shown in the display if "Clean
Speed Edit On“ is set up in the setup
menu).
CleanSpdRev=60%
Shows the set cleaning speed during
reverse drive in % of the max. value (is
only shown in the display if "Clean
Speed Edit On“ is set up in the setup
menu).
FACT
Displays the current brush speed.
WDB-Function=OFF
Displays the set WDB function (wall-
ceiling-floor nozzle).
RM-Dosing
Shows the set detergent volume (is
only shown in the display if "RM Edit
On“ is set up in the setup menu).
Operating hours 2 h
10 m
Displays the current operating hours in
hours (h) and minutes (m).
Speed:0.0km/h
Displays the current drive speed in km/
h.
Alfred Kärcher
Displays the appliance manufacturer.
B80W 3.03
Displays the versions of the integrated
software.
Pxxx Sxxx Vxxx Pxxx
Display of additional electronic infor-
mation:
Pxxx = speed value (0-255) With max.
movement of driving lever, a value of
250-255 must be displayed.
Sxxx = nominal speed value 0-61 (*0.1
km/h)
Vxxx = actual speed value 0-61 (*0.1
km/h)
Pxxx = electronic information only 0-
250
Ixxx Bxxx Mxxx Pxxx
Ixxx = current pickup drive motor in A
(0-50).
Bxxx = current pickup brush motor in A
(0-255).
Mxxx = electronic information only
Pxxx = electronic information only
+=xxx mV –=xxx mV
Electronic information only
Dxxx Axxx Exxx Sxxx Dxxx = safety sensor distance
Axxx = max. speed at a distance of 150
cm (0...30...60) *0.1 km/h.
Exxx = max. speed at a distance of 30
cm (0...30...60) *0.1 km/h.
Sxxx = nominal value (0-60) *0.1 km/h
Содержание B 80 W Bp
Страница 1: ...English 5 906 468 0 Rev 00 02 09 1 BR BD 65 80 W B80W Service Manual...
Страница 6: ...6 English 5 906 468 0 Rev 00 02 09 4 2 Rear view...
Страница 26: ...26 English 5 906 468 0 Rev 00 02 09 6 Circuit diagram 6 1 Circuit diagram 0 089 050 0 BAT models...
Страница 27: ...English 5 906 468 0 Rev 00 02 09 27 6 2 Circuit diagram 0 089 051 0 BAT PACK models...