![background image](http://html1.mh-extra.com/html/karcher/b-80-w-bp/b-80-w-bp_service-manual_3579740025.webp)
English 5.906-468.0 Rev. 00 (02/09)
25
Î
Remove the drive belt cover (see Chapter 5.11).
Î
Unscrew the fastening screws (arrows) of the brush drive.
Î
Pull the brush drive out of the brush head.
Î
Disconnect the connecting cable of the brush motor.
Î
Install the new brush drive in reverse sequence.
Brush mirror adjustment
Î
Park the brush head on an even surface.
Î
Install the new brush rollers.
Î
Slightly shake the brush head so that the brush drive with the
brush rollers can adapt to the even surface.
Î
Tighten the fastening screws (arrows).
1
Brush drive
Î
Close the stop valve.
Î
Unscrew the filter cup.
Î
Remove the sieve and rinse it.
Î
Assemble in reverse order.
1
Filter pot
2
Locking tap
If the fault message "Gas>POTI_ZER_MAX" is displayed, the
drive control is not set correctly and the appliance will not run. In
this case, the positioning of the tooth segement and the toothed
gear is incorrect.
Î
Unscrew the operating panel.
Î
Remove the right and left drive levers.
Î
Remove the entire drive control.
Î
Unscrew the side plate and readjust the position of the tooth
segment to the toothed wheel by one tooth forward/backwards.
Î
Check the drive control and adjust by moving it by one more
tooth if necessary.
1
Shaft with magnet
2
Side plate
3
Toothed gear segment
4
Halting plate
5
Return spring
6
Toothed gear
7
Magnetic sensor for drive control (B1)
8
Microswitch (S6), suction turbine
9
Connection cable, magnetic sensor
10 Connection cables, microswitch (S6)
5.12 Remove the brush drive on the BR brush head
5.13 Clean water filter.
5.14 Adjust drive control
Содержание B 80 W Bp
Страница 1: ...English 5 906 468 0 Rev 00 02 09 1 BR BD 65 80 W B80W Service Manual...
Страница 6: ...6 English 5 906 468 0 Rev 00 02 09 4 2 Rear view...
Страница 26: ...26 English 5 906 468 0 Rev 00 02 09 6 Circuit diagram 6 1 Circuit diagram 0 089 050 0 BAT models...
Страница 27: ...English 5 906 468 0 Rev 00 02 09 27 6 2 Circuit diagram 0 089 051 0 BAT PACK models...