14
English
Eliminating faults yourself
You can eliminate minor faults yourself using the following overview. If in doubt or if the fault/cause is not
stated below, please consult the authorised customer service.
Danger of electric shock!
Repair work on the machine may only be carried out by the authorized Customer Service.
Fault
Cause
Remedy
Vacuum cleaner does
not start.
No mains power.
Check fuse, cable, plug and socket
and, if required, have them replaced
by an electrician.
Suction power
decreases.
Paper filter bag, flat pleated filter,
nozzle, suction hose or suction tube
blocked. Filter status display lit red.
Check and, if required, clean.
Paper filter bag or dirt container full.
Replace paper filter bag or empty dirt
container.
No flat pleated filter or incorrectly
inserted.
Insert flat pleated filter correctly.
Dust escapes when
vacuuming.
Suction hose incorrectly connected.
Connect suction hose correctly.
No flat pleated filter, incorrectly
inserted or defective.
Insert flat pleated filter correctly or
replace.
When wet-vacuuming:
water leaks out.
Float jammed.
Float switch defective.
Remove and turn over motor housing.
Release the jammed float in the cage.
If the fault cannot be eliminated,
please consult customer service.
