13
English
Checking/replacing the flat pleated
filter
(Order no. 6.414-498)
Regularly check the flat pleated filter for damage.
If the flat pleated filter is damaged, replace it
immediately, otherwise the motor may be damaged.
!
Switch the unit off and open the cover on the
filter compartment.
!
Remove the flat pleated filter and replace with
a new one. Close the cover.
Checking and cleaning the
accessories
!
Check the nozzle, suction hose and suction
tube for blockages. They can be cleaned by
rinsing with water. Leave them to dry before
using.
Storing the vacuum cleaner
!
Switch the machine off.
!
Pull out the mains cable.
Note: Pull out the mains cable by the plug. Never tug
the cable.
If you have been working in wet-vacuuming
mode:
!
Empty the dirt container, rinse the inside
if required and leave to dry.
If you have vacuumed up viscous liquids:
!
Rinse the accessory.
!
Place the suction tubes and accessories in the
accessory bracket.
Technical Specifications
Mains connection
220–240 V
(AUS)
240 V
1~50,60 Hz
Fuse protection (surge-proof)
10 A
Power (suction motor)
P
max
1200 Watt
P
nom
1000 Watt
Air flow rate
68 l/s
Vacuum
200 mbar
Capacity
18 l
Max. water capacity
12 l
Length
390 mm
Width
290 mm
Height
490 mm
Weight without accessories
6 kg
Nominal width, accessory
Ø 35 mm
Sound level
72 dB(A)
Class of protection
II
Cable length
5 m
2.
2.
1.
1.
