Kärcher 2.273-001.0, Руководство пользователя

Страница: 5 / 76

– 2
All training modes are executed with the
remote control's start/stop button!
The remote control must be trained (con-
nected) prior to its first use.
If the device has not yet been trained with
any remote controls, then the training mode
is automatically activated for 2 minutes af-
ter being switched on.
If another remote control is to be trained,
then the training mode has to be activated
beforehand.
 Turning on the Appliance
 Quickly press the start/stop button 4x.
 Press and hold the start/stop button 1x.
The suction turbine of the device quick-
ly switches on and off again to confirm
the procedure.
 Quickly press the start/stop button 3x.
 Quickly press the start/stop button 3x.
 Press and hold the start/stop button 1x.
The suction turbine of the device quick-
ly switches on and off again twice to
confirm the procedure.
The device can be controlled remotely after
training the remote control:
 To switch it on: quickly press the start/
stop button.
 To switch it off: quickly press the start/
stop button.
Note: The on/off switch on the device still
remains active and can be used normally.
The remote control memory must be delet-
ed in order to operate the device without a
remote control.
 Turning on the Appliance
 Quickly press the start/stop button 8x.
 Press and hold the start/stop button 1x.
The suction turbine of the device quick-
ly switches on and off again to confirm
the procedure.
 The remote control requires no mainte-
nance.
 Clean the casing with a damp cloth if re-
quired.
* If the device is already switched on, briefly
switch it off and on again.
** Press the button for less than a second. *** Press the button for longer than a sec-
ond.
Training the remote control
1. Activate training mode
2. Train remote control
3. End training mode
Operation
Deleting the remote control
memory in the device
Care and maintenance
Overview of the possible training modes
Mode Device main
switch*
Quickly
press the
button**
Press and
hold the
button***
Feedback from de-
vice
Activate training mode Switch on 4x 1x Suction turbine
switches on quickly
Train remote control 3x
End training mode 3x 1x Suction turbine
switches on quickly
x2
Delete trained remote
control (delivery state) Switch on 8x 1x Suction turbine
switches on quickly
5 EN