English
29
Warranty
The warranty conditions issued by our relevant sales
company apply in all countries. We shall remedy possi-
ble malfunctions on your appliance within the warranty
period free of cost, provided that a material or manufac-
turing defect is the cause. In a warranty case, please
contact your dealer (with the purchase receipt) or the
next authorised customer service site.
(See overleaf for the address)
Technical data
Subject to technical modifications.
Vibration value
몇
WARNING
The specified vibration value was measured using a
standard test procedure and may be used to compare
devices.
The specified vibration value may be used in a provi-
sional assessment of the load.
Depending on the way the device is used, the vibration
emission can deviate from the specified overall value
during the current use of the device.
Device with a hand-arm
vibration value > 2.5 m/s² (see
chapter
Technical Data
in the
operating instructions)
몇
CAUTION
●
Uninterrupted
use of the device for several
hours can lead to numbness.
●
Wear warm gloves to protect
your hands.
●
Take regular
breaks from work.
EU Declaration of Conformity
We hereby declare that the machine described below
complies with the relevant basic safety and health re-
quirements in the EU Directives, both in its basic design
and construction as well as in the version placed in cir-
culation by us. This declaration is invalidated by any
changes made to the machine that are not approved by
us.
Product: Hedge trimmer
Type: HGE 36-60 Battery
Currently applicable EU Directives
2000/14/EC (+2005/88/EC)
2014/30/EU
2006/42/EC (+2009/127/EC)
2011/65/EU
Harmonised standards used
EN 50581: 2012
EN 55014-1: 2017
EN 55014-2: 2015
EN 60745-1:2009+A11:2010
EN 60745-2-15:2009+A1:2010
Conformity evaluation procedure used
2000/14/EC and amended by 2005/88/EC: Appendix V
Sound power level dB(A)
Measured:89.1
Guaranteed:93
The signatories act on behalf of and with the authority of
the company management.
Documentation supervisor: S. Reiser
Alfred Kärcher SE & Co. KG
Alfred-Kärcher-Str. 28 - 40
71364 Winnenden (Germany)
Ph.: +49 7195 14-0
Fax: +49 7195 14-2212
Winnenden, 01.07.2018
Fault
Cause
Rectification
The device does not start
up
Battery pack is not inserted correctly.
Push the battery pack into the mounting
until it latches into place.
Battery pack is empty
Charge the battery pack.
Battery pack is defective.
Replace the battery pack.
The device stops during
operation
Blade blocked with cutting material.
Remove cutting material from the blade.
The battery has overheated
Stop working and allow the battery to cool
down to normal battery temperature.
Motor has overheated
Stop working and allow the motor to cool
down.
Device performance data
Working voltage of the battery
V
36
Idling speed (normal setting)
/min
350-
1240 ±
10%
Cut material diameter (max.)
mm
26
Determined values in acc. with EN 60745-1,
EN 60745-2-15
Sound pressure level L
pA
dB(A)
78,1
Uncertainty K
pA
dB(A)
3,4
Sound power level L
WA
+ K uncer-
tainty
WA
dB(A)
93
Front handle hand-arm vibration
value
m/s
2
0,3
Rear handle hand-arm vibration
value
m/s
2
0,3
Uncertainty K
m/s
2
1,5
Dimensions and weights
Cutting lenght
mm
600
Weight (without battery pack)
kg
3,
4
5
Chairman of the Board of Management
Director Regulatory Affairs & Certification
H. Jenner
S. Reiser
Содержание 1.444-250.0
